ADSS cable is loose tube stranded. Fibers, 250μm , are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE (polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath.
The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed. For overhead power lines under 110kV, PE outer sheath is applied. FOR power lines equal to or over 110kV, AT outer sheath is applied. The dedicate design of aramid quantity and stranding process can satisfy the demand on various spans.
ADSS Cable 0.9mm Fiber Optic Cable
1.For ADSS cable (100-1500) the fiber counts from 12-144 fibers.
2. Suitable for use on distribution and high voltage transmission lines.
3. Instead of Aramid yarn or glass yarn, there is no support or messenger wire required.
26F, 2# Building, Global Finance Center, Yangzhou city, Jiangsu, China.